Skip to content

Everything Eddy Current

Products

WeldCheck

The WeldCheck Series of Flaw Detectors appeals to users across a wide range of sectors including Offshore, Rope Access, Infrastructure NDT applications, plus other weld inspection requirements replacing MPI and LPI, especially on coated welds.

The WeldCheck2 EC Flaw Detector is single channel, 10Hz- 20MHz, lightweight eddy current flaw detector, housed in a tough  aluminium alloy Mg Si 0.5 powder-coated outer case with rubber end bumpers and has been designed with the end user in mind and was developed to meet the requirements on EN1711 & ISO 17643 "Eddy Current Examination of Welds by Complex Phase Analysis" 

As an advanced flaw detector for weld inspection the WeldCheck+ delivers dual channel/frequency capability, Automatic Lift Off Gain Compensation (LOGC) and conductivity measurement, further enhancing the operator's inspection capability in the field. LOGC automatically compensates for coating thickness variations in real time further improving the quality of the inspection results.

“Dual Channel” for weld inspection means the weld probe can simultaneously assess coating thickness and detect defects, increasing operator efficiency and output.

Designed and manufactured in the UK, out instruments a backed by the ETher NDE promise of outstanding customer service and technology that is both reliable and advanced.

WeldCheck Brochure (803.8KB)

Advantages

  • Designed to meet the requirements on EN1711 & ISO 17643 "Eddy Current Examination of Welds by Complex Phase Analysis"
  • Single & Dual Frequency models available
  • Large Daylight readable colour display 145mm (5.7”)
  • Rugged metal housing yet Lightweight 1.2kg (2.6lbs)
  • Built-in “flip” function works equally well for left or right-handed users
  • Industry standard connectors 2-Way Lemo and Co-axial Lemo 00 connectors
  • Over 7 hours battery life
  • 3 year standard warranty
  • Optional EThercover extending warranty to 6 years.

Features

Works the way you do

The WeldCheck has been designed with the built-in “flip” function works equally well for left or right-handed users. As with mobile phone or keyboard usage, our fingers become accustomed to repeating patterns of key presses. The WeldCheck keypad has been cleverly designed to exploit this trait, with all critical keys being in the same position regardless of whether the Instrument is being operated in “right-handed” or “left-handed” mode.

Operator defined “soft keys”

There are four soft key positions for operator selectable icons for frequently used functions and a fifth position for the last menu function used. Each saved instrument setting can be associated with a unique, one press set of quick access functions. There are also two front panel hard keys that can also be easily programmed for rapid one press access to instrument functions.

Innovative “Loop” Feature

“Loop” is a convenient way of capturing a live repetitive signal and then adjusting the instrument settings especially Phase, Gain and Filters in order to simplify the task of optimizing the parameters.

“Guides” Feature

"Guides" allow the user to display a slide show that can be created easily with commonly used desktop software. The benefit of this feature is that instructions, tutorials and procedures for the inspection can be added to the AeroCheck+ very quickly and the NDT inspector can easily switch between the Inspection itself and the “Guides” while performing a live test.

Videos


Standard Kit

WELDCHECK 2 Standard Kit (KIWEL003)

Part NumberItem
IWEL003Instrument, WeldCheck 2, Single Frequency (20Hz-20MHz), Hand Held Portable Flaw Detector, Software & Manual on USB Stick
AWEL002Accessory, WeldCheck, Power Adapter + Input Plugs (UK, EU, US & Australia)
AWEL003Accessory, Adjustable Shoulder Strap, Padded with Quick-Release
AC006Accessory, Instrument Soft Carry Case
A090USB Cable, A to MIN B, 1 metre
40463Quick Reference Card – WeldCheck

WELDCHECK + Standard Kit (KIWEL002)

Part NumberItem
IWEL003Instrument, WeldCheck+, Dual Frequency (10Hz-12.8MHz), Hand Held Portable Flaw Detector, Software & Manual on USB Stick
AWEL002Accessory, WeldCheck, Power Adapter + Input Plugs (UK, EU, US & Australia)
AWEL003Accessory, Adjustable Shoulder Strap, Padded with Quick-Release
AC006Accessory, Instrument Soft Carry Case
A090USB Cable, A to MIN B, 1 metre
40463Quick Reference Card – WeldCheck
ALLCX-M02-015AAccessory, Lead, Lemo 00 to Microdot, 1.5m (Absolute)
ALL12-L04-015RAccessory, Lead, Lemo 12-Way - Lemo 4-Way (Reflection)

Accessories

Part NumberItem
AER002Hard Transit Case (AeroCheck)
AAER004Protective Splash Proof Cover (WeldCheck / AeroCheck)
40470Tripod Bracket - To fit 1/4" Camera Tripod Mount with Male Screw (WeldCheck / AeroCheck / AeroCheck+)
AWEL006External, 8 x AA Battery Holder and On/Off Switch
AWEL008In-car Power Adapter
ALL12-L04-015RAccessory, Lead, Lemo 12-Way - Lemo 4-Way, 1.5m (Reflection)
ALL12-L04-015BLead, Lemo 12-Way - Lemo 4-Way, 1.5m (Bridge)
ALLCX-M02-015AAccessory, Lead, Lemo 00 to Microdot, 1.5m (Absolute)
ALLCX-B02-015AAccessory, Lead. Lemo 00 to BNC, 1.5m (Absolute)

Standard EC Weld Probe Package (KAWEL001)

Our Standard Weld Inspection Package can be used across our range of Eddy Current Flaw Detectors and those of our competitors. Designed and manufactured in the UK, our Weld Probes are of high quality build with fast delivery times.

Part NumberItem
PWM100S000Probe, Weld, Medium, Dia 16.00, 100kHz, Straight, Disconnect
PUB100KUnshielded, Broad Band (Paint), 100k (35kHz-250kHz), BNC
ATBWAccessory, Test Block, Weld Probe, Ferrous (Steel EN1A) + x 4 0.5mm Shims, 0.5, 1.0, 2.0mm slots
ALL12-L04-015BLead, Lemo 12-Way - Lemo 4-Way, 1.5m (Bridge)
ALLCX-M02-015AAccessory, Lead, Lemo 00 to Microdot, 1.5m (Absolute)
AW003Accessory, Butterfly PTFE Tape (Pack of 30)
AW002Probe Carry Bag

Specification