At ETher NDE we can offer two types of Conductivity Probes that fit our SigmaCheck Conductivity Meter.
We can now offer our standard Conductivity Probe and our 8mm version. These probes have been designed for use with the SigmaCheck Eddy Current Conductivity Meter, conductivity is widely used to indicate material type and determine the state of heat treatment. In order to give accurate readings the SigmaCheck-2 uses a three-point reference method. The first measurement with the probe in the air and then two further measurements are required which span the range of interest.
The SigmaCheck is supplied with a detachable reference piece with two standards that span the range of commonly used metals.
|Standard Conductivity Probe|
|PSIG001||Probe, Conductivity, 60, 120, 240 and 480 Khz|
Dia 13.00mm, Straight, LEMO 5-way
|8mm Conductivity Probe|
|PSIG002||Probe, Conductivity, 60, 120, 240 and 480 Khz|
Dia 8.00mm, Straight, LEMO 5-way
Download our Probe Catalogue
Short Form Probe Catalogue (1.7MB)
Industries & Applications