Skip to content

Everything Eddy Current

Training

Conductivity Probes

At ETher NDE we can offer two types of Conductivity Probes that fit our SigmaCheck Conductivity Meter.

We can now offer our standard Conductivity Probe and our 8mm version. These probes have been designed for use with the SigmaCheck Eddy Current Conductivity Meter, conductivity is widely used to indicate material type and determine the state of heat treatment.  In order to give accurate readings the SigmaCheck-2 uses a three-point reference method. The first measurement with the probe in the air and then two further measurements are required which span the range of interest.

The SigmaCheck is supplied with a detachable reference piece with two standards that span the range of commonly used metals.

Part #Item
Standard Conductivity Probe
PSIG001Probe, Conductivity, 60, 120, 240 and 480 Khz
Dia 13.00mm, Straight, LEMO 5-way
 
8mm Conductivity Probe
PSIG002Probe, Conductivity, 60, 120, 240 and 480 Khz
Dia 8.00mm, Straight, LEMO 5-way

Download our Probe Catalogue

Short Form Probe Catalogue (1.7MB)

ETher NDE Probe Catalogue (1.4MB)

Related Products

SigmaCheck 2

SigmaCheck 2
More