Eddy Current Weld Probes - Standard

• Broad frequency range.
• Cables up to 50 meters available.
• Able to detect cracks through a wide range of coatings.
• Available in a wide range of diameters.

Bridge Weld Probes offer many Key Features within their specification including:

• Straight, 90deg Inline, 90deg Right Angle
• Diameters, 11.0 (Small), 16 (Medium), 32mm (Large)
• Dis-connectable and integral probe cables
• Cable lengths from 1.5 to 50 meters
• Frequency range 100, 20, 100-600kHz
• Minimal lift off signal, can find cracks through paint, oil and conductive and non-conductive coatings
• Made from hard wearing PET
• Stainless steel and ceramic tips available on request

The ETher NDE range of Standard Weld Probes include:

• Straight
• 90 Degree Inline
• 90 Degree Transverse

​We are also able to offer:

Disconnectable Weld Probes

We offer full range of Eddy Current (EC) Disconnectable Weld Probes available for quick interchange. All you have to do is simply select “000” to probe part number as shown on weld probe coding system on the downloadable datasheet available here.

6mm Diameter Weld Probes

We are able to offer the Eddy Current (ET) 6mm Diameter Weld Probe with either a straight or 90 degree angled shaft.

If you have an application that you feel would suit the use of Miniture Eddy Current (EC) Weld Probes, please feel free to contact us at sales@ethernde.com.

​Below is the link to the Standard Eddy Current Testing (ECT) Weld Probe Datasheet which includes a Part Number matrix to make ordering the correct Eddy Current (EC) Weld Probe for your application as easy as possible. If you are unsure of exactly what you are looking for, please follow the link below and email us directly and we will be happy to help you.